|
|
TC 4 |
Rolling bearings |
ISO/TS 16281: 2008 |
Rolling bearings – Methods for calculating the modified reference rating life for universally loaded bearings |
TC 6 |
Paper, board and pulps |
ISO 5269‑3: 2008 |
Pulps – Preparation of laboratory sheets for physical testing – Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system |
TC 17 |
Steel |
ISO 6316:2008 |
Hot-rolled steel strip of structural quality |
ISO 6317:2008 |
Hot-rolled carbon steel strip of commercial and drawing qualities |
TC 22 |
Road vehicles |
ISO 9129:2008 |
Motorcycles – Measurement methods for moments of inertia |
TC 23 |
Tractors and machinery for agriculture and forestry |
ISO 6535:2008 |
Portable chain-saws – Chain brake performance |
ISO 10998:2008 |
Agricultural tractors – Requirements for steering |
ISO 21244:2008 |
Agricultural equipment – Mechanical connections between towed and towing vehicles – Implement hitch rings and attachment to tractor drawbars |
ISO 26402:2008 |
Agricultural vehicles – Steering systems for agricultural trailers – Interface for articulated steering device of semi- mounted trailers |
TC 27 |
Solid mineral fuels |
ISO 540:2008 |
Hard coal and coke – Determination of ash fusibility |
ISO 23499:2008 |
Coal – Determination of bulk density |
TC 30 |
Measurement of fluid flow in closed conduits |
ISO/TR 9464: 2008 |
Guidelines for the use of ISO 5167:2003 |
TC 31 |
Tyres, rims and valves |
ISO/TR 29846: 2008 |
Tyres, valves and tubes – kPa/psi equivalencies for inflation pressures |
TC 34 |
Food products |
ISO 664:2008 |
Oilseeds – Reduction of laboratory sample to test sample |
ISO 1003:2008 |
Spices – Ginger (Zingiber officinale Roscoe) – Specification |
ISO 6668:2008 |
Green coffee – Preparation of samples for use in sensory analysis |
ISO 8586‑2: 2008 |
Sensory analysis – General guidance for the selection, training and monitoring of assessors – Part 2: Expert sensory assessors |
ISO 27971:2008 |
Cereals and cereal products – Common wheat (Triticum aestivum L.) – Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology |
TC 35 |
Paints and varnishes |
ISO 15181‑5: 2008 |
Paints and varnishes – Determination of release rate of biocides from antifouling paints – Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract |
TC 37 |
Terminology and other language and content resources |
ISO 639‑5:2008 |
Codes for the representation of names of languages – Part 5: Alpha-3 code for language families and groups |
TC 38 |
Textiles |
ISO 9073‑17: 2008 |
Textiles – Test methods for nonwovens – Part 17: Determination of water penetration (spray impact) |
TC 39 |
Machine tools |
ISO 8525:2008 |
Airborne noise emitted by machine tools – Operating conditions for metal-cutting machines |
TC 44 |
Welding and allied processes |
ISO 3581:2003/ Cor 1:2008 |
Welding consumables – Covered electrodes for manual metal arc welding of stainless and heat-resisting steels – Classification – Technical Corrigendum 1 |
TC 45 |
Rubber and rubber products |
ISO 16565:2008 |
Rubber – Determination of 5- ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene- propylene-diene (EPDM) terpolymers |
ISO 17564:2008 |
Raw hydrogenated nitrile rubber (HNBR) – Determination of residual unsaturation by iodine value |
ISO 24698‑1: 2008 |
Rubber, raw – Determination of bound acrylonitrile content in acrylonitrile- butadiene rubber (NBR) – Part 1: Combustion (Dumas) method |
ISO 24698‑2: 2008 |
Rubber, raw – Determination of bound acrylonitrile content in acrylonitrile- butadiene rubber (NBR) – Part 2: Kjeldahl method |
TC 46 |
Information and documentation |
ISO/TR 26122: 2008 |
Information and documentation – Work process analysis for records |
TC 60 |
Gears |
ISO 6336‑1: 2006/Cor 1: 2008 |
Calculation of load capacity of spur and helical gears – Part 1: Basic principles, introduction and general influence factors – Technical Corrigendum 1 |
ISO 6336‑2: 2006/Cor 1: 2008 |
Calculation of load capacity of spur and helical gears – Part 2: Calculation of surface durability (pitting) – Technical Corrigendum 1 |
ISO 6336‑3: 2006/Cor 1: 2008 |
Calculation of load capacity of spur and helical gears – Part 3: Calculation of tooth bending strength – Technical Corrigendum 1 |
TC 61 |
Plastics |
ISO 6721‑2: 2008 |
Plastics – Determination of dynamic mechanical properties – Part 2: Torsion- pendulum method |
ISO 10840:2008 |
Plastics – Guidance for the use of standard fire tests |
ISO 15106‑4: 2008 |
Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 4: Gas-chromatographic detection sensor method |
ISO 15512:2008 |
Plastics – Determination of water content |
ISO 16869:2008 |
Plastics – Assessment of the effectiveness of fungistatic compounds in plastics formulations |
ISO 25761:2008 |
Plastics – Polyols for use in the production of polyurethanes – Determination of basicity (total amine value), expressed as percent nitrogen |
TC 67 |
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries |
ISO 10416:2008 |
Petroleum and natural gas industries – Drilling fluids – Laboratory testing |
ISO 20815:2008 |
Petroleum, petrochemical and natural gas industries – Production assurance and reliability management |
ISO 23251: 2006/Amd 1: 2008 |
Petroleum, petrochemical and natural gas industries – Pressure-relieving and depressuring systems – Amendment 1 |
TC 69 |
Applications of statistical methods |
ISO 11843‑5: 2008 |
Capability of detection – Part 5: Methodology in the linear and non-linear calibration cases |
TC 72 |
Textile machinery and accessories |
ISO 28239:2008 |
Textile machinery – Opener and cleaner for staple fibres preparation – Vocabulary and principles of construction |
TC 108 |
Mechanical vibration, shock and condition monitoring |
ISO 18431‑2: 2004/Cor 1: 2008 |
Mechanical vibration and shock – Signal processing – Part 2: Time domain windows for Fourier Transform analysis – Technical Corrigendum 1 |
ISO 18437‑4: 2008 |
Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials – Part 4: Dynamic stiffness method |
TC 119 |
Powder metallurgy |
ISO 4490:2008 |
Metallic powders – Determination of flow rate by means of a calibrated funnel (Hall flowmeter) |
ISO 11877:2008 |
Hardmetals – Determination of silicon in cobalt metal powders – Photometric method |
ISO 17352:2008 |
Hardmetals – Determination of silicon in cobalt metal powders using graphite- furnace atomic absorption |
TC 121 |
Anaesthetic and respiratory equipment |
ISO 5359:2008 |
Low-pressure hose assemblies for use with medical gases |
ISO 10524‑4: 2008 |
Pressure regulators for use with medical gases – Part 4: Low-pressure regulators |
TC 130 |
Graphic technology |
ISO 12637‑4: 2008 |
Graphic technology – Vocabulary – Part 4: Postpress terms |
ISO 12646:2008 |
Graphic technology – Displays for colour proofing – Characteristics and viewing conditions |
TC 131 |
Fluid power systems |
ISO 3601‑4: 2008 |
Fluid power systems – O-rings – Part 4: Anti-extrusion rings (back-up rings) |
TC 138 |
Plastics pipes, fittings and valves for the transport of fluids |
ISO 10147: 2004/Amd 1: 2008 |
Pipes and fittings made of crosslinked polyethylene (PE-X) – Estimation of the degree of crosslinking by determination of the gel content – Amendment 1 |
TC 150 |
Implants for surgery |
ISO 13356:2008 |
Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
ISO 16402:2008 |
Implants for surgery – Acrylic resin cement – Flexural fatigue testing of acrylic resin cements used in orthopaedics |
TC 159 |
Ergonomics |
ISO 9241‑151: 2008 |
Ergonomics of human-system interaction – Part 151: Guidance on World Wide Web user interfaces |
TC 160 |
Glass in building |
ISO 16933: 2007/Cor 1: 2008 |
Glass in building – Explosion-resistant security glazing – Test and classification for arena air-blast loading – Technical Corrigendum 1 |
ISO 16934: 2007/Cor 1: 2008 |
Glass in building – Explosion-resistant security glazing – Test and classification by shock-tube loading – Technical Corrigendum 1 |
ISO 16935: 2007/Cor 1: 2008 |
Glass in building – Bullet-resistant security glazing – Test and classification – Technical Corrigendum 1 |
TC 164 |
Mechanical testing of metals |
ISO 12135: 2002/Cor 1: 2008 |
Metallic materials – Unified method of test for the determination of quasistatic fracture toughness – Technical Corrigendum 1 |
TC 165 |
Timber structures |
ISO 16572:2008 |
Timber structures – Wood-based panels – Test methods for structural properties |
TC 171 |
Document management applications |
ISO 24517‑1: 2008 |
Document management – Engineering document format using PDF – Part 1: Use of PDF 1.6 (PDF/E-1) |
TC 173 |
Assistive products for persons with disability |
ISO 7176‑5: 2008 |
Wheelchairs – Part 5: Determination of dimensions, mass and manoeuvring space |
TC 184 |
Automation systems and integration |
ISO 10303‑41: 2005/Cor 1: 2008 |
Industrial automation systems and integration – Product data representation and exchange – Part 41: Integrated generic resource: Fundamentals of product description and support – Technical Corrigendum 1 |
TC 204 |
Intelligent transport systems |
ISO/TR 21707: 2008 |
Intelligent transport systems – Integrated transport information, management and control – Data quality in ITS systems |
TC 206 |
Fine ceramics |
ISO 23146:2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) – Test methods for fracture toughness of monolithic ceramics – Single-edge V-notch beam (SEVNB) method |
ISO 26443:2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) – Rockwell indentation test for evaluation of adhesion of ceramic coatings |
TC 211 |
Geographic information/Geomatics |
ISO/TS 19101‑2:2008 |
Geographic information – Reference model – Part 2: Imagery |
ISO 19141:2008 |
Geographic information – Schema for moving features |
TC 213 |
Dimensional and geometrical product specifications and verification |
ISO/TS 15530‑4:2008 |
Geometrical Product Specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement – Part 4: Evaluating task-specific measurement uncertainty using simulation |
TC 214 |
Elevating work platforms |
ISO 16653‑1: 2008 |
Mobile elevating work platforms – Design, calculations, safety requirements and test methods relative to special features – Part 1: MEWPs with retractable guardrail systems |
TC 217 |
Cosmetics |
ISO 15819:2008 |
Cosmetics – Analytical methods – Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS |
TC 220 |
Cryogenic vessels |
ISO 21013‑1: 2008 |
Cryogenic vessels – Pressure-relief accessories for cryogenic service – Part 1: Reclosable pressure-relief valves |
TC 221 |
Geosynthetics |
ISO 10319:2008 |
Geosynthetics – Wide-width tensile test |
JTC 1 |
Information technology |
ISO/IEC 7811‑6: 2008 |
Identification cards – Recording technique – Part 6: Magnetic stripe – High coercivity |
ISO/IEC 7811‑9: 2008 |
Identification cards – Recording technique – Part 9: Tactile identifier mark |
ISO/IEC 14496‑2:2004/ Amd 4:2008 |
Information technology – Coding of audio- visual objects – Part 2: Visual – Amendment 4: Simple profile level 6 |
